Ipar és terepmunka · Gyártás és ipar
MI-alkalmazások gyártóknak és üzemeknek
Írjon műszakátadókat, kódolja az állásidők okait, készítsen nem megfelelőségi jelentéseket, és állítson össze karbantartási ellenőrzőlistákat.
Amit ezek az alkalmazások átvállalnak
- Átadott műszakok
Írja meg a gyártási műszak átadóját, és kódolja az állásidő minden okát.
- Feltárt minőségi problémák
Készítsen nem megfelelőségi jelentést, és jusson el a gyökérokig az öt miért módszerével.
- Karbantartott gépek
Mérje fel a gép hibáját, készítsen karbantartási ellenőrzőlistát, és készítsen elő egy rövid munkavédelmi eligazítást.
Alkalmazások ebben a szakmában
- Production Shift Handover
Turns a shift's raw production log into a structured handover note for the incoming supervisor.
- Downtime Reason Coder
Assigns a standard downtime reason code to a described machine stoppage for OEE reporting.
- Nonconformance Report Draft
Writes a formal nonconformance report from an inspector's rough observation notes.
- Five Whys Chain
Builds a five whys causal chain and a probable root cause from a described production problem.
- Machine Fault Triage
Lists ranked probable causes and the confirming check for each from a described equipment symptom.
- Maintenance Checklist Builder
Produces a grouped preventive maintenance checklist for an asset at a stated service interval.
- Toolbox Talk Generator
Writes a five minute shop floor safety briefing on a chosen hazard for the crew.
- Near Miss Risk Rating
Rates a reported near miss on severity and likelihood and returns a risk band with controls.
- Quote Spec Extractor
Pulls the quotable specifications and the blocking clarification questions out of a customer enquiry.
- Work Instruction Translator
Translates a shop floor work instruction into another language while preserving every step and value.
- Scrap Log Analyzer
Ranks defect types, shares and scrap rate from pasted scrap log rows for a production period.
- Eight D Report Draft
Drafts a structured 8D corrective action report from a customer or internal quality complaint.
- Audit Finding Classifier
Grades a quality audit finding as major, minor, observation or improvement opportunity with reasoning.
- Supplier Deviation Notice
Writes a formal notice to a supplier about a nonconforming delivery with the action required.
- OEE Loss Commentary
Recomputes OEE from entered figures and explains which loss factor to attack first.
- Control Logic Explainer
Explains a pasted PLC ladder or structured text routine in plain language for the maintenance team.
- Bill Of Materials Cleaner
Normalises a pasted bill of materials into clean columns and flags the lines a planner must fix.
- Kaizen Idea Scorer
Screens a shop floor improvement suggestion with scores and a do now or reject verdict.
- Make Or Buy Verdict
Recommends making a part in house, buying it out or dual sourcing, with arguments and open data gaps.
- Machine Spec Digest
Condenses an equipment datasheet into key specs and says whether it fits your site and application.
- Process FMEA Starter
Turns a described process step into draft PFMEA rows with failure modes, effects, causes and controls.
- Control Plan Draft
Drafts control plan rows for a process, one per characteristic, with method, frequency and reaction plan.
- Dimension Report Checker
Compares measured dimensions against their tolerances and flags every out-of-tolerance feature.
- Material Certificate Check
Checks a pasted material or mill certificate against the grade requirements you specify.
- Capability Study Verdict
Reads capability study figures and says whether the process is capable, centred and ready to release.
- Work Order Writer
Turns a rough repair request into a complete maintenance work order ready for the system.
- Spare Part Criticality
Scores a spare part for criticality and recommends whether to stock it, order it on demand or drop it.
- Lockout Tagout Steps
Builds a step by step lockout tagout procedure for a machine from its energy sources.
- Safety Data Sheet Digest
Reduces a pasted safety data sheet to the handling, protection and first aid the shop floor needs.
- Job Hazard Breakdown
Breaks a task into steps and gives the hazard, exposure and control for each one.
- Waste Walk Classifier
Sorts shop floor observations into the eight lean wastes and ranks what to remove first.
- Changeover Time Reducer
Splits a changeover into internal and external steps and proposes a shorter sequence.
- Five S Audit Score
Scores a work area against the five S standards and gives the actions that lift the weakest one.
- Error Proofing Ideas
Proposes poka-yoke controls that make a recurring mistake hard or impossible to repeat.
- Job Sequence Planner
Orders a list of open jobs into a run sequence and explains the trade-offs behind it.
- Supplier Scorecard Comment
Turns supplier delivery and quality figures into a scorecard commentary with the actions to demand.
- Quote Comparison Verdict
Compares supplier quotes on a common basis and recommends which one to award.
- Stock Item Classifier
Classifies stock lines into ABC value bands and gives the stocking rule for each band.
- Change Request Draft
Writes a formal engineering change request with the reason, the impact and the approvals needed.
- Manufacturability Review
Reviews a part description against the chosen process and lists the features that will cause trouble.
- Material Selection Shortlist
Shortlists candidate materials for a part and names the trade-off that decides between them.
- Process Parameter Adviser
Suggests the parameter changes most likely to remove a recurring process defect.
- Spec Sheet Writer
Turns internal engineering data into a clean customer facing product specification sheet.
- Skills Gap Planner
Compares operator skills against what the line needs and returns a ranked training plan.
- Operator Quiz Builder
Generates competency questions and an answer key from a work instruction to verify training.
- Customer Complaint Reply
Drafts the reply to a customer quality complaint, with what was found and what happens next.
- Packing Instruction Writer
Writes the packing and labelling instruction for a part so it ships without transit damage.
- Calibration Due List
A dated list of every instrument already overdue for calibration and every one falling due inside your chosen window.
- Cycle Time Bottleneck
A ranked operation by operation cycle time table that names the bottleneck holding your line back.
- Batch Record Review
A list of the missing entries and out of limit values in a completed batch record, with the questions to put to the operator.
- Manual Procedure Finder
The numbered procedure for one maintenance task, drawn only from the machine manual you upload.
- Energy Invoice Breakdown
A line by line breakdown of a site energy invoice, including the energy consumed per unit produced.
- Supply Agreement Risks
A clause referenced map of the obligations, penalties and termination triggers buried in a supply agreement.
- Breakdown Log Digest
A ranking of your worst assets by downtime, with the faults that keep coming back on each one.
- Spec Compliance Matrix
A clause by clause verdict on whether your plant can meet a customer specification, with a compliance percentage.
- Incoming Inspection Plan
A receiving inspection plan listing every characteristic, its tolerance, method, sample size and accept rule.
- Nameplate Asset Record
A typed asset record, make, model, serial and ratings, read straight off a photo of a machine nameplate.
- Part Defect Describer
An objective description and defect classification of a photographed part, ready to paste into a nonconformance record.
- Pallet Label Capture
Every field on an incoming pallet label typed out and checked against the purchase order you expected.
- HMI Screen Decoder
A transcription of the fault on a machine screen, what it is reporting, and the safe checks to make before calling maintenance.
- Tool Wear Describer
A description of the wear visible on a photographed cutting edge, with a severity rating out of five.
A katalógus munkaterületeden
The same applications are in the catalogue of your Reasoning workspace, filtered by trade. Open one to run it on your own text, or add it as a step of a chain.
Hogyan működik egy alkalmazás
- Válassza ki a feladatot
Minden alkalmazás a szakma egy feladatát fedi le, egy mondatban leírva.
- Töltse ki a mezőit
Illessze be a jegyzeteit, egy üzenetet vagy egy dokumentumrészletet azokba a mezőkbe, amelyeket az alkalmazás kér.
- Használja a választ
Olvassa el a strukturált eredményt, amelyet másolhat, elküldhet vagy archiválhat, vagy kérje le az Ultineo Reasoning API-n keresztül.
Bízza ezeket a feladatokat az Ultineo Reasoning szolgáltatásra
Mondja el, mely alkalmazásokra van szüksége a csapatának, és megnyitjuk a hozzáférését.
Kérdések ezekről az alkalmazásokról
Yes. You can customize the applications, so their fields and instructions follow your own practice.
Csak azt a tartalmat, amelyet a mezők kérnek, például jegyzeteket, egy üzenetet vagy egy dokumentumrészletet. Ne osszon meg több személyes adatot, mint amennyit a feladat megkövetel.
Igen. Az Ultineo Reasoning API bármely alkalmazást elindít, amelyet a projektje használhat, és visszaadja a válaszát, amint a futtatás elkészült.